One litre AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis

Mixes safely with other DOT 3 , DOT 4 and DOT 5.1 brake and clutch fluids. If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650

Please note this part CANNOT be posted outside of the UK mainland area.

See BRA99014 for high performance alternative

 More than 5 in stock

Brakelight switch for Magura handlebar master cylinder

This is a compatible replacement for the original part which is no longer available.

 This part is due back in stock soon, call 01484 841395 to reserve yours

39741101-z 39741101 GU39741101 39 74 11 01
 3974 1101 3974.1101 39.74.11.01

Pair of EBC FA047 brake pads for Brembo F05 (P5) calipers and Grimeca front calipers

 5 in stock

27654610-z 27654610 GU27654610 27 65 46 10
 2765 4610 2765.4610 27.65.46.10

Also fits Benelli 250 TS, Ducati Pantah 500SL, Magni Sfida

Pair of Brembo 07BB0106 carbon ceramic brake pads with wear indicators for Brembo F05 (P5) and Grimeca calipers

For rear only on Daytona, 1100 Sport, Centauro and V11 Sport. Fronts only on Strada 750 (Brembo equipped). Fits Nevada up until frame no. LK112433 Fits V50 ALL front and rear

 This part is due back in stock soon, call 01484 841395 to reserve yours

27654610-z 27654610 GU27654610 27 65 46 10
 2765 4610 2765.4610 27.65.46.10

Also fits Benelli 125 2C Fronts, Benelli 504 Sport Fronts (1976), Benelli 654 Fronts (1983), Bimota YB7 Rear (1989), Ducati 620 i.e Rear (2001), Ducati Monster 900 i.e. Rear (2002), Ducati Monster 1000 Rear (2003), Ducati Monster 1000 S Rear (2004), Ducati Monster S4 Rear (2001), Moto Morini Dart 350 Rear (1987), Moto Morini 350 Kanguro Rear (1987), Moto Morini Excaliber 350/501 Rear (1993-)

Brakelight switch for handlebar mounted master cylinder

Stop light switch also known as Guzzi ref. 30530526. Please compare with your existing switch to check compatibility. Can be used as a substitute for ELA27815. See ELA30861 for less expensive alternative part. Sometimes supplied with three terminals, in this instance disregard middle terminal

 4 in stock

 30749860 GU30749860 30 74 98 60
 3074 9860 3074.9860 30.74.98.60

Front brake master cylinder cap and rubber kit for Brembo PS 13 / PS16 master cylinder. Screw holes parallel to top and bottom edges

Brembo ref. 110430860

 1 in stock

Also fits Ducati 907 i.e.

Brembo pad pin kit for Brembo F05 (P5) calipers. Contains one long pin, two short and retaining spring

Brembo ref. 120280010, also used on some Laverdas . Front calipers only on Strada

 More than 5 in stock

 39659100 GU39659100 39 65 91 00
 3965 9100 3965.9100 39.65.91.00

Also fits Benelli 250 TS

Screw in brakelight switch for linked system proportioning valve or splitter

Screws into yoke mounted manifold for hand brake

 This part is available by special order, request a quote

 25657001 GU25657001 25 65 70 01
 2565 7001 2565.7001 25.65.70.01

Single stainless steel M10 banjo bolt with bleed nipple for Brembo fittings. Supplied with bleed nipple cap and crush washers. Perfect for bleeding up old P9, F08 and F05 calipers where the bleed nipple has broken off. This can also be used to add additional bleed points to linked systems where airlocks are causing problems

These can be used to replace the standard banjo bolt on CARC models. See alternative part BRA41653 for Stahlbus auto bleed banjo bolt

 More than 5 in stock

Also fits Benelli 250 TS

Pair of EBC FA047 sintered brake pads for Brembo F05 (P5) and Grimeca calipers for extra braking power

Fits Nevada up until frame no. LK112433 Fits all calipers on pre 1993 models

 Order now and we will post your order within 7 days.

27654610-z 27654610 GU27654610 27 65 46 10
 2765 4610 2765.4610 27.65.46.10

Also fits Benelli 250 TS